[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: REFLECTOR: Wing attach bolts



Dave,
I know that you probably have great contempt for FAA rules, however, the
rule is found in AC43-13-1A.  A fiberlock nut should have no more than 3
threads protruding through the nut when the nut is propoerly torqued. So, if
your bolt is bottoming out, the only choice you have for a proper fit is to
change the bolt to one with the proper length.
-----Original Message-----
From: faisonco@ibm.net <faisonco@ibm.net>
To: reflector@awpi.com <reflector@awpi.com>; David Brown
<velcty@earthlink.net>
Date: Friday, July 09, 1999 4:52 PM
Subject: Re: REFLECTOR: Wing attach bolts


>David Brown wrote:
>>
>> I am bolting my wings on for what I hope will be the last time before
>> flight. I have the STD wing. The AN8-30a bolts are requiring between 6
and
>> 7 thick AN816 washers in order to keep the locknuts from bottoming out.
>>
>> I'm thinking of replacing the bolts with -26 or -27 length. Has anyone
else
>> had this problem?
>>
>> Dave Brown
>  Dave I had the same (kit # 14) problem. Used a shorter grade 8 bolt
>fits good. This bolt is stronger than AN bolt and has rolled threads.
>Im  not flying yet but they should work
>fine.                               Al Faison
>