[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: strake

  Al- my theory was that the interior air would cool as the resin did. It would expand initially, then cool to hopefully draw the resin in. The pinholes that gave me problems were at specific points- there were less than a dozen and they persisted through several coats- so I think that each might have been a large void. It might help to preheat the work space then reduce the temp during the cure.   -Bill
prototype 'Super' Chipmunk N18EF
Velocity Classic RG N6098S in the works