[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: Aileron control torque bearing (add on)



>>My problem is not the fix but having to take out the instrument panel to
access the bearing holder.  With all the wiring, and connections this
will probally take 20 hours or more
>>

I would remove the seat, lay on the floor, create an access hole opposite
the bracket and work through there.  This way you can have a inspection
point for future inspections.  Of course, I am still building and do not
have my panel in place yet, but I still plan on putting in the access hole
to get to the support bracket and bearing and fix it that way.

Bob Kuc LWE