RE: REFLECTOR: electrical

["Chuck Caldarale" <n828cl@ix.netcom.com>]

> From: owner-reflector@awpi.com [mailto:owner-reflector@awpi.com]On
> Behalf Of HadleyAir@aol.com
> Subject: Re: REFLECTOR: electrical
>
> One small correction if I may. The PIDG terminal,
> according to my information, not only has the tin
> plated copper terminal but instead of aluminum, a
> second tin plated copper sleeve to form the diamond
> grip (hence Pre-Insulated Diamond Grip) around the
> insulation of the wire to relocate the flexing point
> of the wire away from the point of compression.

You're right, of course. I just remembered the silvery color, and didn't
look at the AMP manual to check the material.

 - Chuck