[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: REFLECTOR: coaxial cable
By the transponder manufacturer and I would assume by the amount of power loss in
the length of cable. Each type of cable will have a predetermined loss per foot at
a specific frequency so the amount of loss can be determined.
Jim
David Doshay wrote:
> Jim writes:
> >If this coax is to be used for the transponder then you are limited to about 7
> >feet for RG58. You can go to 17' with RG-142
>
> How are these lengths determined?
>
> Thanks,
> David
--
//------10--------20--------30--------40--------50--------60--------70--------80
// James F. Agnew
// Tampa, FL
// Velocity 173 FG Elite ( http://www.VelocityAircraft.com/ ) under construction