[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: coaxial cable

To: reflector@awpi.com
Subject: Re: REFLECTOR: coaxial cable
From: David Doshay <ddoshay@cisco.com>
Date: Wed, 03 Feb 1999 20:39:43 -0800
In-reply-to: Your message of "Wed, 03 Feb 1999 21:12:59 EST." <36B9022B.55BF8453@IBM.NET>
Reply-To: reflector@awpi.com, David Doshay <ddoshay@cisco.com>
Sender: owner-reflector@awpi.com

Jim writes:
>If this coax is to be used for the transponder then you are limited to about 7
>feet for RG58.  You can go to 17' with RG-142 

How are these lengths determined?

Thanks,
David

Follow-Ups:
- Re: REFLECTOR: coaxial cable
  - From: "James F. Agnew" <Jim_Agnew@ibm.net>
- Re: REFLECTOR: coaxial cable
  - From: "James F. Agnew" <Jim_Agnew@ibm.net>

References:
- Re: REFLECTOR: coaxial cable
  - From: "James F. Agnew" <Jim_Agnew@ibm.net>

Prev by Date: Re: REFLECTOR: coaxial cable
Next by Date: Re: REFLECTOR: coaxial cable
Prev by thread: Re: REFLECTOR: coaxial cable
Next by thread: Re: REFLECTOR: coaxial cable
Index(es):
- Date
- Thread