[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

REFLECTOR: Mg Bulkhead; Plywood Direction

To: "REFLECTOR" <reflector@awpi.com>
Subject: REFLECTOR: Mg Bulkhead; Plywood Direction
From: "Benjamin David Cowan" <bdcowan@telepath.com>
Date: Mon, 11 Jan 1999 22:05:15 -0600
Reply-To: reflector@awpi.com, "Benjamin David Cowan" <bdcowan@telepath.com>
Sender: owner-reflector@awpi.com

Is the plywood grain direction crucial on the main gear bulkhead? Anyone? I'm building an RG

and have just jigged up the bends with 5 minute.. However I cut the plywood with the grain running

vertically.. Is that OK?

David Cowan

Std RG E

Follow-Ups:
- Re: REFLECTOR: Mg Bulkhead; Plywood Direction
  - From: Dave Black <asterisk@erols.com>

Prev by Date: Re: REFLECTOR: Trim Spring and Triax
Next by Date: Re: REFLECTOR: Mg Bulkhead; Plywood Direction
Prev by thread: REFLECTOR: Re: Peel Ply
Next by thread: Re: REFLECTOR: Mg Bulkhead; Plywood Direction
Index(es):
- Date
- Thread