[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: REFLECTOR: Torque tube bearings
Al and TEC write:
<< I could not see the back of the bracket,
>> but one had to conclude that the bearing had gotten past the screw heads in
>> some manner. >>
> ... The counter sunk head screws used in Simons and others should
>at lease be large head screws. My STG-RG, uses the large head screws as used
>in attaching the elevators to the canard, along with the bearing installed
>from the front.
I'll be going with a capture plate, 3 or 4 screws, and
installation from the front. Some part of that may be overkill,
but I am sure it will do what is required.
Cheers and safety to all,
David