[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: Which epoxy now?

>What epoxy are folks using to suplement the no longer available


I like the EZ-83 hardener which cures in 24+ hours, but it is also quite
viscous; takes too long to wet out on fine BID.  EZ -84 has same pot life
(~2 hrs) and fully cures in three days and gives the lowest mixed viscosity.
EZ-87 has longer pot life but results in even more viscous mix than the 83.

These all go with the EZ-10 resin.  They also work well with the D.E.R. 324
resin, but there's no data on the cured properties.


Al Gietzen  RGE  N755V