[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
REFLECTOR: Cowl Old - New Cut Line
A year ago, I put on my plane's wings on for alignment. I clecoed on the
upper cowl, and marked where the wings meet the cowl.
Chapter 18 Cowl Treatments Figure 18-1 Relocating horizontal cowl joint
shows an Old cut line and a New cut line. I have a standard wing. My new
cut line will be 3/8" above the old cut line. Is this correct?
Figure 18-1 was made with the new cut line, which appears to be a few
inches below the old cut line.