[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: REFLECTOR: Rudders & Ailerons
Once you put the hinge backing layers in the wells, you will have
sufficient thickness to countersink the screws to be flush.
At 08:24 AM 10/5/98 -0500, you wrote:
>Getting ready to attach rudders and ailerons. Book says to use
>AN526C-1032R8 screws, washers and lock nuts.
>I've sanded my wings and rudders down to where I hit the glass as the book
>suggested. Saves weight that way. Now I realize that of the Velocity's I've
>seen they don't have these big ugly screws sticking out.... Have I missed
>something, or does everyone put on microballon thick enough to cover them
>or use different screws???
>Ex-Army helicopter pilot, came in 2nd place SE Asia war games.
>Some what competent in Rotorway's.
>Hey, any body can fly a fixed wing!!
>Better than most, good as the rest!
>173 FG 180