[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: Fuel strainers

To: reflector@awpi.com, "Putney, Gordon A." <GORDON.A.PUTNEY@snapon.com>
Subject: Re: REFLECTOR: Fuel strainers
From: "James F. Agnew" <Jim_Agnew@ibm.net>
Date: Fri, 02 Oct 1998 10:17:03 -0400
References: <199810021256.HAA12645@sisko.awpi.com>
Reply-To: reflector@awpi.com, "James F. Agnew" <Jim_Agnew@ibm.net>
Sender: owner-reflector@awpi.com

Putney, Gordon A. wrote:
> 
> I am considering removable finger strainers (4) in my 173RG tanks
> instead of the fixed (uncleanable) strainers in the plans. Any
> thoughts on this approach?????

Works fine on Simon's and my plane. I machined AL threaded bushings and
glassed them in the tank bulkheads.  You then screw in the finger
strainers and connect your lines.

Jim
-- 
//------10--------20--------30--------40--------50--------60--------70--------80
// James F. Agnew
// Tampa, FL
// Velocity 173 FG Elite ( http://www.VelocityAircraft.com/ ) under
construction

References:
- REFLECTOR: Fuel strainers
  - From: "Putney, Gordon A." <GORDON.A.PUTNEY@snapon.com>

Prev by Date: REFLECTOR: Fuel strainers
Next by Date: Re: REFLECTOR: Nose gear guide
Prev by thread: REFLECTOR: Fuel strainers
Next by thread: Re: REFLECTOR: Fuel strainers
Index(es):
- Date
- Thread