[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: REFLECTOR: Cowl screws
Bob,
> I put on the #8 nutplates, screws and washers as supplied, but if I had
> it to do over I would use #10's. The #8 screws seem to strip out
> easier, at least for me.
I use #10 Marine screws that don't rust in Florida like aircraft
hardware.. They have a steeper bevel with deeper screwdriver grip and
don't stick up much from the #8 tinnerman washers that work fine drilled
out slightly.
Alan