[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: Trim wiring

I used a G7 MAC grip and it does not have any relays built in.  I got a 
diagram from Martin and wired a gang of relays for all functions except 
IDENT and PTT.  The relays were wired in such a way to prevent pushing 
more than one button at a time.  I probably still have the diagram 
Martin gave me if you need it.

>From: NMFlyer1@aol.com
>Date: Tue, 1 Sep 1998 15:22:52 EDT
>To: Reflector@awpi.com
>Subject: REFLECTOR: Trim wiring
>Reply-To: reflector@awpi.com, NMFlyer1@aol.com
>I am getting ready to install the keel in my 173 FGE. This seems the 
>time to wire the roll trim motor and run the wires in the keel. Since I 
>using the Mac. G5 grip, I need to know what the current draw is on the 
>and roll trim motors. The G5 uses 26 guage wire internally and to the 
>( Seems a little lite for this application, but the mac's have a built 
>relay from my understanding).  I called the factory, and they didn't 
know the
>current draw, or what size wire I would need. I'm sure Martin can help 
me out
>here, but thought the rest of you may have some input too.  There isn't 
>room inside the G5 so I need the smallest guage wire that will safely 
>the load.     Thanks in advance Martin!     
>Kurt Winker

Get Your Private, Free Email at http://www.hotmail.com