[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REFLECTOR: StrikeFinder Sensor in Canard



Hi Martin
All cable as been installed with appropriate connectors to remove the
canard when you need it.Regarding the foam dept you have to dig enough to
clear the sensor cable connector which the upper parts as been removed
andcables bend and make sure those connectors pins does not come out and
than you sealed the connector with silicone rubber or if you can find a 90
degres connector and can fit on this space can be better. when the sensor
is secure in place and the surface flush at the canard bottom you sealed
with all around with silicone again.
Jean

----------