[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

No Subject

Pot your mounting plate, glass surrounding areas, cure .

Snake your cable AND mounting-plate ground wire, steering well clear of
things electrical behind the panel on your way to the canard.

Attach cable and bolt in Sensor. After install the sensor in place I
sealed the countour with silicone rubber and "voila le tour est joue"
(after doing this everything will be fine). 

Another tip:
Put noise-filters at the positive alternator connection and the
plus-side of your EI.

Jean Prudhomme,
XL-300 N401JP