[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Oil Cooler Installation

>Simon,  did you run the oil lines forward, down, then under the cooler (Fig
>1); or did you run them back, down, then aft to the duct (Fig 2)?


Kind of hard to interpret the figures in my format. The way I have them is
out of the duct at the canard bulkhead, up along the hull an over the top
of the cooler. One of them not really over the top because the elbow is
right at the edge. Hopr that makes sense.


Simon Aegerter, Winterthur, Switzerland