[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RG Main Gear Overcenter
I'm about to hook up the cables from my gear to the hyd. cylinder.
I've read postings where many have described the slight "rocking" of the
overcenter linkage between the sockets when the linkage is fully overcenter.
Mine ended up a slight bit tighter. The linkage goes overcenter no problem
but still has a snug fit with no sway. I think that at its longest the
linkage must ever so slightly push on the sockets/bulkheads. I can't detect
the movement, but you can feel a small resistance in the linkage as it goes
past "top dead center".
As long as the O-center falls thru I can't think of how this would be
undesirable, but I wanted to check with you guys before I hooked up those