[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Simon Aegerter [KPIE] wrote:
> >>how much space do i need to allow for the upolstery when installing
> seat-tilt side supports prior to actual upolstery. 173 elite rg <<
> More than you have! The space is so critically tight that it is almost
> impossible to fit the seats. In fact, some builders have cut their
> seats in
> half and made them 1" narrower. I removed all the screws in the hinge
> replaced them with countersunk flatheads. Further, I lined the keel
> nothing but thin leather in the seat area. Juuuust works!
> Good luck!
- From: "Simon Aegerter [KPIE]" <firstname.lastname@example.org>